Stainless Steel 304 90° Elbow, Polished Forged Low-Pressure Enquiry
산업 소싱용
명확한 RFQ 준비
RELIA가 부품을 이해하고 다음 단계를 논의할 수 있도록 아래 정보를 포함하세요.
- 도면, 샘플 또는 참고 표준
- 재질 등급 및 선호 공정
- 치수, 공차 및 표면 처리
- 용도, 목표 수량 및 목적지
생산 일정, 포장 및 운송 조건은 사양과 거래 조건 합의 후 프로젝트별로 확정됩니다.
-
warranty3 Yearscustomized supportODM, OEM
-
TechnicForgedConnectivityFemale/Male
-
shapeEqualhead codeRound
-
Overall Length1/8"-6"Height1/8"-6"
-
Surface TreatmentPolishingPressureLow Pressure
-
System of MeasurementinchMounting hole diameter1/8"-6"
-
Pipe FeaturesNo additional FeaturesPipe Class150, 150
-
Applicationbuilding water supply and drainage, fire protection systems, natural gas & petroleum industry, natural gas pipeline installation, natural gas transportation, water supply and drainage systemsThread TypesNPT OR BSPT
This 90-degree elbow enquiry is led by polished forged stainless steel 304 and low-pressure piping requirements. Select the actual material and supplied connection before ordering. The sixteen actual variants combine four metric sizes with Stainless Steel, Zinc, Iron or Carbon Steel; 304 does not describe every option.
Select the stainless option and dimensional basis
Choose the required material and 10 mm, 12 mm, 14 mm or 50 mm designation. Clarify whether that size denotes nominal size, tube outside diameter or another dimension. Request selected angle, centreline radius, end diameters, walls, centre-to-end dimensions and tolerances on an accepted drawing.
The inch range under length, height and mounting-hole labels is not the selected metric geometry. Equal requires matching end dimensions. Dark curved examples and the separate metallic bend photograph cannot certify stainless grade, zinc composition, manufacturing route or pressure performance.
Specify the supplied ends and finish acceptance
Obtain an explicit end specification. A welded selection needs preparation, matching pipe wall and joining inspection. A threaded selection needs one exact NPT or BSPT form with nominal size, gender, engagement, gauging and sealing acceptance. These alternatives should not be treated as interchangeable; confirm the actual delivered configuration.
For a stainless 304 request, obtain the selected material specification, exact grade, heat-traceable certificate and matching identification. Forged requires actual production records. Polishing needs selected surface extent and finish acceptance, rather than an assumed measured roughness or hygienic certification. Confirm compatibility with the intended medium.
Establish project-specific low-pressure suitability
Low Pressure gives no numerical operating limit. The class label needs its governing standard, material and temperature basis; it does not mean a universal 150-psi rating. Drainage, fire-protection, natural-gas and petroleum names provide no independent approvals. Assess actual medium composition, temperature, pressure, cycles and complete joint. Enquire with selected material/size, grade certificate, end drawing, manufacturing/finish acceptance and documented duty.
모든 제품 문의에 필요한 기술 정보
최종 제품 확정 전에 요구사항을 준비하세요.
제품 페이지는 출발점입니다. 재고 매칭 또는 맞춤 생산 확정 전에 도면, 샘플, 인터페이스, 소재, 수량, 검수 요구사항을 검토합니다.
프로젝트 상황에 맞춰 이 제품을 상담하세요.
도면, 샘플, 참조품, 목표 수량, 용도 정보를 공유하세요. 미확정 항목은 검토 상태로 둘 수 있습니다.
