Stainless Steel 304/316/316L & Carbon Steel Forged Plate Flange Enquiry
산업 소싱용
명확한 RFQ 준비
RELIA가 부품을 이해하고 다음 단계를 논의할 수 있도록 아래 정보를 포함하세요.
- 도면, 샘플 또는 참고 표준
- 재질 등급 및 선호 공정
- 치수, 공차 및 표면 처리
- 용도, 목표 수량 및 목적지
생산 일정, 포장 및 운송 조건은 사양과 거래 조건 합의 후 프로젝트별로 확정됩니다.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentSmoothMounting hole diameter0.26 in
-
Pipe Class150SizeCustomized Size
-
Product nameElbow
This forged plate flange enquiry carries stainless steel 304, 316 and 316L, carbon steel, DIN, ANSI, class 150 and PN16 wording. Accept the actual component identity and construction before choosing a flange for a mating pipe joint.
Start with construction and one complete dimensional basis
The fifteen Flange selections combine 10 mm, 12 mm, 14 mm, 50 mm or 30 mm with Stainless Steel, Alloy or Carbon Steel. These single metric labels do not define a flange bore, nominal pipe size or drilling pattern.
Request the selected component drawing identifying plate or hub construction and through-bore or blind purpose. Specify outside diameter, thickness, bore, bolt circle, hole count and diameter, facing and tolerances. Confirm the 0.26 in mounting-hole entry against that drawing. Equal and Hexagon wording does not complete flange geometry.
Select a certified grade and an accepted manufacturing route
For a stainless requirement, choose the exact grade and obtain a traceable material certificate supporting any 304, 316 or 316L request. Those names are not interchangeable or additional selectable variants. Alloy requires its own identified specification and composition; Carbon Steel also needs an exact grade.
Agree what forged plate construction means for the supplied part, including manufacturing records and inspection. For welding, define actual end preparation, pipe-wall and bore matching, assembly requirements and acceptance. Smooth finish alone does not establish facing roughness or coating. Photographs assist form comparison without certifying construction or grade.
Resolve the mating standard and the complete joint duty
DIN and ANSI wording needs a selected numbered standard and edition. Establish the matching flange pattern and governing rating basis; PN16 and class 150 must not be treated as automatic equivalents or a certified operating limit.
Provide the medium, temperature, pressure and cycling for assessment with the actual gasket and fasteners. Submit accepted identity, construction, complete dimensions, material certificate, manufacturing and joining requirements, facing and full duty.
모든 제품 문의에 필요한 기술 정보
최종 제품 확정 전에 요구사항을 준비하세요.
제품 페이지는 출발점입니다. 재고 매칭 또는 맞춤 생산 확정 전에 도면, 샘플, 인터페이스, 소재, 수량, 검수 요구사항을 검토합니다.
프로젝트 상황에 맞춰 이 제품을 상담하세요.
도면, 샘플, 참조품, 목표 수량, 용도 정보를 공유하세요. 미확정 항목은 검토 상태로 둘 수 있습니다.
