Steel Equal Tee | A234, DN300 and SCH80 Enquiry
산업 소싱용
명확한 RFQ 준비
RELIA가 부품을 이해하고 다음 단계를 논의할 수 있도록 아래 정보를 포함하세요.
- 도면, 샘플 또는 참고 표준
- 재질 등급 및 선호 공정
- 치수, 공차 및 표면 처리
- 용도, 목표 수량 및 목적지
생산 일정, 포장 및 운송 조건은 사양과 거래 조건 합의 후 프로젝트별로 확정됩니다.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.25 in
-
Pipe Class1000SizeCustomized Size
-
Product nameElbow
An equal tee enquiry should identify the required branch connection and relate it to both run ends. For a project specifying DN300 and SCH80, establish the selected fitting drawing before evaluating material or manufacturing claims. The drawing and supporting records need to describe one configuration that can be compared with the intended pipeline.
Confirm the DN300 and Equal-Branch Requirement
State the nominal sizes at both run ends and the branch, then provide the corresponding mating pipe outside diameters. Ask for the dimensions that establish the required equal-branch relationship and the wall requirement at each connection. A single millimetre label does not identify this three-port configuration. Confirm the nominal-size convention and the mapping of the requested DN300 fitting to the selected model before accepting the dimensional proposal.
Name the Exact Material and Production Requirements
If the project specifies A234, identify the required grade and applicable edition explicitly. Request traceable material records for the quoted tee instead of treating the specification number as a complete grade designation. Give the wall-schedule convention and obtain the actual thicknesses for the chosen size and material. Where seamless construction is required, obtain manufacturing evidence linked to the selected item. Define weld-end preparation, dimensional requirements and any surface treatment independently.
Assess the Tee as Part of the Welded Assembly
Provide the fluid, operating pressure and temperature, together with joint and fabrication requirements. Identify the governing fitting and pressure-design standards and request documentation supporting the selected tee's scope. An isolated class number or visible product marking does not establish the qualified duty of the complete assembly. Finalize the enquiry with the three-port drawing, size and wall mapping, exact grade, manufacturing records and documented operating limits for review against the pipeline design.
모든 제품 문의에 필요한 기술 정보
최종 제품 확정 전에 요구사항을 준비하세요.
제품 페이지는 출발점입니다. 재고 매칭 또는 맞춤 생산 확정 전에 도면, 샘플, 인터페이스, 소재, 수량, 검수 요구사항을 검토합니다.
프로젝트 상황에 맞춰 이 제품을 상담하세요.
도면, 샘플, 참조품, 목표 수량, 용도 정보를 공유하세요. 미확정 항목은 검토 상태로 둘 수 있습니다.
