Industrial Pipe Valve Enquiry with Gate or Ball Configuration Confirmation
산업 소싱용
명확한 RFQ 준비
RELIA가 부품을 이해하고 다음 단계를 논의할 수 있도록 아래 정보를 포함하세요.
- 도면, 샘플 또는 참고 표준
- 재질 등급 및 선호 공정
- 치수, 공차 및 표면 처리
- 용도, 목표 수량 및 목적지
생산 일정, 포장 및 운송 조건은 사양과 거래 조건 합의 후 프로젝트별로 확정됩니다.
-
applicationGeneralBall MaterialCarbon Steel
-
Connection TypeflangemediaBASE
-
Port Size1/4in - 4instructureControl
-
model numberball valveConnection Size1/4in - 4in
-
customized supportOEM, odmFlow Rate0-100L/min
-
For Maximum Pipe Size4in(10.16cm)Operating PressureLow Pressure
-
Operating Temp. Range0~150 Celsiuspowermanual
-
Sealing MaterialPTFEtemperature of mediaMedium Temperature
-
warranty1 year
This industrial pipe valve enquiry requires confirmation of the closure mechanism, material scope and operating conditions for the selected configuration. Identify whether the project requires a gate or ball valve and describe the intended duty. The valve family provides a starting point; the actual mechanism and selected model determine which specification should be assessed.
Establish the closure mechanism and duty
State whether the valve is intended for isolation or flow regulation, and request the corresponding mechanism and model documentation. Confirm how the valve is operated and which actuation arrangement the project needs. A handwheel or external body photograph does not establish the internal closure type or its operating performance. Keep the required function linked to the selected valve rather than accepting a general flow-control description as sufficient.
Define materials and the piping interface
Specify the body, closure and sealing materials separately. A material label for a ball does not establish the pressure-containing body material, and a casting label does not name an exact composition. Request the actual port dimensions, connection type and standard, and face-to-face length. Compare the selected connection drawing with the adjoining pipework. The size choice should be tied to this drawing so it is clear which interface and opening are being evaluated.
Request the operating envelope for the named medium
Provide the intended medium, design pressure, temperature and operating mode. Ask for the selected valve's pressure-temperature and relevant shut-off or regulating documentation. Low Pressure and Medium Pressure labels are qualitative choices, not numeric operating ratings. General flow or temperature ranges also need a defined configuration and test scope before use in a service decision. Complete the enquiry by confirming the mechanism, material, interface and operating limits together, then assess the selected valve against the actual piping duty.
모든 제품 문의에 필요한 기술 정보
최종 제품 확정 전에 요구사항을 준비하세요.
제품 페이지는 출발점입니다. 재고 매칭 또는 맞춤 생산 확정 전에 도면, 샘플, 인터페이스, 소재, 수량, 검수 요구사항을 검토합니다.
프로젝트 상황에 맞춰 이 제품을 상담하세요.
도면, 샘플, 참조품, 목표 수량, 용도 정보를 공유하세요. 미확정 항목은 검토 상태로 둘 수 있습니다.
