Forged Carbon Steel Flanged Top-Entry Ball Valve Enquiry
산업 소싱용
명확한 RFQ 준비
RELIA가 부품을 이해하고 다음 단계를 논의할 수 있도록 아래 정보를 포함하세요.
- 도면, 샘플 또는 참고 표준
- 재질 등급 및 선호 공정
- 치수, 공차 및 표면 처리
- 용도, 목표 수량 및 목적지
생산 일정, 포장 및 운송 조건은 사양과 거래 조건 합의 후 프로젝트별로 확정됩니다.
-
applicationGeneralConnection Typeflange
-
mediaBASEPort Size1/4in - 4in
-
structureControlmodel numberball valve
-
Connection Size1/4in - 4incustomized supportOEM, odm
-
Flow Rate0-100L/minFor Maximum Pipe Size4in(10.16cm)
-
Operating PressureLow PressureOperating Temp. Range0~150 Celsius
-
powermanualSealing MaterialPTFE
-
temperature of mediaMedium Temperaturewarranty1 year
A flanged top-entry ball-valve enquiry needs an identified model, a defined body specification and evidence of the requested internal arrangement. Use the carbon-steel and forged-construction requirements to describe the valve you need, then confirm the selected assembly against its own drawings. The information below helps organize that technical enquiry without assigning an unverified configuration to a particular size or option.
Establish the Top-Entry Assembly
Request a section drawing that identifies the valve mechanism and an assembly drawing that shows the proposed top-entry arrangement. Confirm which components can be accessed through that arrangement and the space needed around the installed valve. If ball-valve construction is essential to the application, have it identified on the selected-model documentation rather than relying on the external appearance alone.
Define Body Construction and Flange Fit
State the exact carbon-steel grade required for the body and obtain the corresponding material records. Identify the manufacturing process separately so that a forged-body requirement is clear. Body, ball and sealing components should each have their own specification. Match the flange facing, drilling, port and face-to-face dimensions to the mating pipeline drawing. Confirm the size designation and interface together before choosing an option.
Build the Operating Requirement
Name the process medium and describe its service temperatures and pressure conditions. Request the pressure-temperature envelope and seat or seal compatibility for the same assembly shown on the drawing. Include the intended manual operation and any installation access constraints. A complete enquiry links the model identifier, top-entry construction, body grade, dimensional drawing and operating evidence. That allows the proposed valve to be assessed against a single set of project requirements before the final configuration is selected.
모든 제품 문의에 필요한 기술 정보
최종 제품 확정 전에 요구사항을 준비하세요.
제품 페이지는 출발점입니다. 재고 매칭 또는 맞춤 생산 확정 전에 도면, 샘플, 인터페이스, 소재, 수량, 검수 요구사항을 검토합니다.
프로젝트 상황에 맞춰 이 제품을 상담하세요.
도면, 샘플, 참조품, 목표 수량, 용도 정보를 공유하세요. 미확정 항목은 검토 상태로 둘 수 있습니다.
