Carbon Steel / Stainless Steel Flanged Ball Valve Enquiry
산업 소싱용
명확한 RFQ 준비
RELIA가 부품을 이해하고 다음 단계를 논의할 수 있도록 아래 정보를 포함하세요.
- 도면, 샘플 또는 참고 표준
- 재질 등급 및 선호 공정
- 치수, 공차 및 표면 처리
- 용도, 목표 수량 및 목적지
생산 일정, 포장 및 운송 조건은 사양과 거래 조건 합의 후 프로젝트별로 확정됩니다.
-
applicationGeneralBall MaterialSTAINLESS STEEL
-
Connection TypeflangemediaBASE
-
Port Size1/4in - 4instructureBall
-
model numberball valveConnection Size1/4in - 4in
-
customized supportOEM, odmFlow Rate0-100L/min
-
For Maximum Pipe Size4in(10.16cm)Operating PressureLow Pressure
-
Operating Temp. Range0~150 Celsiuspowermanual
-
Sealing MaterialPTFEtemperature of mediaMedium Temperature
-
warranty1 year
A flanged ball valve enquiry should identify the required flow passage and the construction supporting the ball. Select the intended bore and support arrangement before comparing materials or operating labels. The useful specification connects those choices to one valve model, its pipe interfaces and the documented conditions under which it will be assessed.
Specify the Flow Bore and Ball-Support Arrangement
Give the nominal connection size and required actual bore separately. State whether the project requires a full- or reduced-bore configuration, and request the dimensions establishing that requirement. Obtain a section drawing showing floating or trunnion support, body construction, stem and seats. The presence of both construction terms does not establish every combination for every size. Link the selected internals to the same model shown in the quotation and dimensional records.
Separate Component Materials from Interface Details
Specify body, ball and sealing materials independently and request traceable records for each required component. A broad steel label or casting description does not define every wetted material. Give the flange standard, facing, drilling and face-to-face requirements, then compare the complete mating pipe interface. Define the manual operator arrangement and available installation access so the proposed assembly can be checked against the intended operating position.
Qualify the Combined Pressure, Temperature and Flow Duty
Name the fluid composition and state operating pressure, temperature and intended flow conditions together. Include the differential-pressure conditions relevant to the flow assessment. Request a qualified operating envelope covering the selected body, seats and assembly, with model-specific test evidence. Standalone temperature or flow figures and qualitative pressure labels cannot define that combined scope. Complete the enquiry with the selected bore/support drawing, component materials, flange and operator interfaces and documented duty limits.
모든 제품 문의에 필요한 기술 정보
최종 제품 확정 전에 요구사항을 준비하세요.
제품 페이지는 출발점입니다. 재고 매칭 또는 맞춤 생산 확정 전에 도면, 샘플, 인터페이스, 소재, 수량, 검수 요구사항을 검토합니다.
프로젝트 상황에 맞춰 이 제품을 상담하세요.
도면, 샘플, 참조품, 목표 수량, 용도 정보를 공유하세요. 미확정 항목은 검토 상태로 둘 수 있습니다.
