Carbon Steel Butt-Weld Cap for A234 WPB Enquiries
산업 소싱용
명확한 RFQ 준비
RELIA가 부품을 이해하고 다음 단계를 논의할 수 있도록 아래 정보를 포함하세요.
- 도면, 샘플 또는 참고 표준
- 재질 등급 및 선호 공정
- 치수, 공차 및 표면 처리
- 용도, 목표 수량 및 목적지
생산 일정, 포장 및 운송 조건은 사양과 거래 조건 합의 후 프로젝트별로 확정됩니다.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
model number4TechnicForged
-
ConnectivityWeldingshapeEqual
-
head codeHexagonOverall Length4 in
-
Height4Surface TreatmentPainting
-
PressureLow PressureSystem of Measurementinch
-
Mounting hole diameter0.2 inPipe FeaturesFlexible, Corrosion-resistant
-
Pipe Class125SizeCustomized Size
-
Product nameElbow
A carbon steel butt-weld cap request should describe a closed pipe termination with a defined weld interface. This product has Stainless Steel, Alloy and Carbon Steel choices, so keep the carbon steel grade requirement attached to the intended cap configuration.
Describe the cap as a closed termination
Show the cap opening, profile and depth on a dimensioned closure drawing. Include the space available beyond the pipe end and any envelope limits that affect the requested profile. Confirm the actual dimensions for the selected cap rather than adopting a general length or shape label. The drawing should make the closed termination clear and identify the surfaces that need to match the mating pipe.
Bring the pipe wall into the butt-weld enquiry
Provide the pipe outside diameter and wall thickness with the required cap-end preparation. Confirm the weld-end arrangement and dimensions together for the proposed closure. A single pipe-size choice does not define the complete opening, wall or bevel, and the same nominal size can require additional dimensional detail. Review the cap wall and profile as part of that connection instead of assuming a general pressure label establishes suitability.
Confirm WPB and seamless requirements for carbon steel
If ASTM A234 WPB and seamless construction are required, state both explicitly and request confirmation for the carbon steel cap to be supplied. Those requirements should not be applied to the other material-family choices without a separate specification. Include the applicable fitting standard, medium and design conditions, and identify the material or inspection documents needed for the project. The final cap request should connect grade and construction to one defined pipe closure before service suitability is accepted.
모든 제품 문의에 필요한 기술 정보
최종 제품 확정 전에 요구사항을 준비하세요.
제품 페이지는 출발점입니다. 재고 매칭 또는 맞춤 생산 확정 전에 도면, 샘플, 인터페이스, 소재, 수량, 검수 요구사항을 검토합니다.
프로젝트 상황에 맞춰 이 제품을 상담하세요.
도면, 샘플, 참조품, 목표 수량, 용도 정보를 공유하세요. 미확정 항목은 검토 상태로 둘 수 있습니다.
