2" RF B16.5 Class 150 A105 Socket-Weld Carbon Steel Flange, Forged CNC Machined
산업 소싱용
명확한 RFQ 준비
RELIA가 부품을 이해하고 다음 단계를 논의할 수 있도록 아래 정보를 포함하세요.
- 도면, 샘플 또는 참고 표준
- 재질 등급 및 선호 공정
- 치수, 공차 및 표면 처리
- 용도, 목표 수량 및 목적지
생산 일정, 포장 및 운송 조건은 사양과 거래 조건 합의 후 프로젝트별로 확정됩니다.
-
Surface TreatmentCNC MachinedApplicationConstruction
-
Bolt Hole Diameter1/2"~24"Bolt Hole Quantity6
A 2-inch RF B16.5 Class 150 A105 socket-weld carbon steel flange is the requested configuration for this construction enquiry. Confirm those particulars on the accepted delivery drawing before treating the forged, CNC-machined naming as an approved component specification.
Confirm the requested size and raised face
The actual size selection is a 1/2"~24" range rather than a discrete 2-inch choice. RF and Class 150 are title references, so obtain the selected facing and class explicitly. Agree the applicable B16.5 edition and type/size/class scope alongside the exact nominal size.
Carbon Steel and Stainless Steel each have Blind, Weld Neck, Slip On, Socket Weld, Lap Joint and Threaded Flange choices. Select one supplied type/material combination. For socket weld, require the accepted socket and bore dimensions with mating-pipe and installation requirements; another listed type cannot establish the same end arrangement.
Accept material and drilling evidence
A105 identifies the named carbon-material basis without certifying the stainless alternative. Obtain the accepted specification, grade, product form, condition and traceable inspection records, with evidence supporting the actual forging and machining route.
Verify outside diameter, thickness, raised-face dimensions/finish, bolt circle, hole count, hole diameters and tolerances. The six-hole table entry and broad bolt-hole diameter range cannot certify this requested drawing. The viewed open-bore flanges and dark-finished pair cannot establish delivered size, socket detail, A105 material, coating or drilling.
Evaluate the complete Class 150 joint
Construction wording does not supply an operating envelope. Class 150 requires the applicable material-temperature basis rather than one fixed pressure, and surface appearance does not prove finish compliance.
Submit actual medium, pressure, temperature, cycling and mechanical loads. Review compatible gasket, fasteners, mating flange and assembly requirements together with the selected end/drilling drawing and material package before accepting the complete joint.
모든 제품 문의에 필요한 기술 정보
최종 제품 확정 전에 요구사항을 준비하세요.
제품 페이지는 출발점입니다. 재고 매칭 또는 맞춤 생산 확정 전에 도면, 샘플, 인터페이스, 소재, 수량, 검수 요구사항을 검토합니다.
프로젝트 상황에 맞춰 이 제품을 상담하세요.
도면, 샘플, 참조품, 목표 수량, 용도 정보를 공유하세요. 미확정 항목은 검토 상태로 둘 수 있습니다.
