ASME B16.9 Carbon Steel Short-Radius 45° Butt-Weld Elbow
산업 소싱용
명확한 RFQ 준비
RELIA가 부품을 이해하고 다음 단계를 논의할 수 있도록 아래 정보를 포함하세요.
- 도면, 샘플 또는 참고 표준
- 재질 등급 및 선호 공정
- 치수, 공차 및 표면 처리
- 용도, 목표 수량 및 목적지
생산 일정, 포장 및 운송 조건은 사양과 거래 조건 합의 후 프로젝트별로 확정됩니다.
-
warranty1 Yearcustomized supportOEM, ODM
-
model numberelbow 3623TechnicCasting
-
ConnectivityFemale/MaleshapeReducing
-
head codeRoundSurface TreatmentPainting
-
Mounting hole diameter0.17 inPipe Class150
This pipe elbow enquiry centres on a carbon-steel short-radius bend with a 45-degree butt-weld requirement under ASME B16.9. A selected-item drawing is essential when comparing the available size and material choices. The photographs include different curved arrangements, so establish the actual angle and radius before using the images to plan a compact pipe direction change.
Specify the bend envelope
State the required deflection angle and centreline radius as separate dimensions. Request end-to-centre measurements, nominal sizes, outside diameters and wall thickness for the selected elbow. Explain what the millimetre size option measures and whether both ends have the same bore or a reducing arrangement. The required short radius should be checked against the governing dimensional specification and available installation space, including access for welding and inspection.
Match the butt-weld interface
Define bevel angle, land and end-wall requirements together with the mating pipe dimensions. The Female/Male field does not establish thread geometry or replace a weld-preparation drawing. Choose the carbon-steel variant and specify its exact grade and material standard; stainless-steel alternatives require a separate designation. Link material and production records to that selected item before accepting its construction, since the generic Casting field alone does not establish the manufacturing route.
Set dimensional and service acceptance
Provide the B16.9 edition, dimensional tolerances and agreed inspection requirements. State the fluid, operating pressure and temperature, corrosion conditions and fabrication constraints so engineering assessment covers the complete welded joint. A Pipe Class 150 field is not a pressure-temperature qualification for this elbow, and the Painting or mounting-hole labels do not demonstrate coating performance or measured bend dimensions. A useful enquiry combines the required angle and radius with one end-detail drawing, exact grade and traceable acceptance records.
모든 제품 문의에 필요한 기술 정보
최종 제품 확정 전에 요구사항을 준비하세요.
제품 페이지는 출발점입니다. 재고 매칭 또는 맞춤 생산 확정 전에 도면, 샘플, 인터페이스, 소재, 수량, 검수 요구사항을 검토합니다.
프로젝트 상황에 맞춰 이 제품을 상담하세요.
도면, 샘플, 참조품, 목표 수량, 용도 정보를 공유하세요. 미확정 항목은 검토 상태로 둘 수 있습니다.
