ASME B16.9 Carbon Steel 45° Short-Radius Butt-Weld Elbow
산업 소싱용
명확한 RFQ 준비
RELIA가 부품을 이해하고 다음 단계를 논의할 수 있도록 아래 정보를 포함하세요.
- 도면, 샘플 또는 참고 표준
- 재질 등급 및 선호 공정
- 치수, 공차 및 표면 처리
- 용도, 목표 수량 및 목적지
생산 일정, 포장 및 운송 조건은 사양과 거래 조건 합의 후 프로젝트별로 확정됩니다.
-
warranty1 yearcustomized supportOEM, ODM
-
model numberelbow 2069TechnicCasting
-
ConnectivityMale/FemaleshapeEqual/Reducing
-
head codeHexagon/RoundSurface TreatmentPainting
-
Mounting hole diameter0.17 inPipe Class150
This pipe elbow enquiry brings together a 45-degree direction change, a short-radius requirement and carbon-steel butt-weld construction under ASME B16.9. Use those requirements to identify one offered model and its supporting drawing. The size and material options need to be linked to that model before the curved product photographs can be used as a useful visual reference.
Check the direction change against the layout
Provide the required angle and centreline radius, together with end-to-centre dimensions and available pipe-routing space. Confirm whether the chosen elbow has equal or reducing ends. Show both outside diameters, nominal sizes and wall thickness on the drawing, and explain the dimensional basis of the millimetre-labelled option. Appearance alone cannot establish the specified angle, radius or reduction. Review access for the actual joint preparation and subsequent inspection as part of the layout check.
Define material and weld-end alignment
Select the carbon-steel alternative and state its exact grade and material specification. Stainless-steel options require their own grade identification rather than inheriting the title's material requirement. Match the bevel, land and end wall to the mating pipe and agree root alignment and inspection requirements. The Male/Female field does not define the butt-weld interface. Ask for selected-item production and inspection records before accepting the generic Casting label as the manufacturing route.
Link acceptance to the operating conditions
Specify the B16.9 edition and dimensional tolerances to be checked, then identify the evidence required for acceptance. Give the fluid, design pressure and temperature, corrosion conditions and joining requirements for engineering review of the complete connection. Class 150 is an isolated source field and does not establish a pressure-temperature limit for the elbow. Painting, head-code and mounting-hole labels also do not demonstrate protective finish performance or measured bend geometry. The final enquiry should connect one dimensional drawing with the exact grade, weld details and traceable acceptance records.
모든 제품 문의에 필요한 기술 정보
최종 제품 확정 전에 요구사항을 준비하세요.
제품 페이지는 출발점입니다. 재고 매칭 또는 맞춤 생산 확정 전에 도면, 샘플, 인터페이스, 소재, 수량, 검수 요구사항을 검토합니다.
프로젝트 상황에 맞춰 이 제품을 상담하세요.
도면, 샘플, 참조품, 목표 수량, 용도 정보를 공유하세요. 미확정 항목은 검토 상태로 둘 수 있습니다.
