RF WN Flange Enquiry | B16.5 or EN1092-1, F304 or A105 Requirements
산업 소싱용
명확한 RFQ 준비
RELIA가 부품을 이해하고 다음 단계를 논의할 수 있도록 아래 정보를 포함하세요.
- 도면, 샘플 또는 참고 표준
- 재질 등급 및 선호 공정
- 치수, 공차 및 표면 처리
- 용도, 목표 수량 및 목적지
생산 일정, 포장 및 운송 조건은 사양과 거래 조건 합의 후 프로젝트별로 확정됩니다.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
model numberflange 4103TechnicForged
-
ConnectivityWeldingshapeEqual
-
head codeHexagonSurface TreatmentSmooth
-
Mounting hole diameter0.25 inPipe Class1000
-
ApplicationAgricultural Irrigation, Automotive Repair, Heating Systems
This RF weld-neck flange enquiry brings together dimensional standard, material and pressure-designation requirements that must be selected for one configuration. Identify whether the project calls for ASME B16.5 or EN1092-1, then define the applicable material and joint geometry. The enquiry should establish a clear specification without assuming that different standard systems describe an interchangeable flange.
Choose the standard and its pressure designation
State the required dimensional standard and edition on the project drawing. Define the pressure designation within that standard and confirm PN16 only where it applies to the selected configuration. Request the corresponding facing, flange thickness and bolt-pattern dimensions. A designation from another system should not be treated as an equivalent operating rating without the applicable documentation and a complete mating-interface check.
Separate the F304 and A105 material requirements
Identify the A182 F304 requirement for the intended Stainless Steel configuration or the A105 requirement for the Carbon Steel configuration. Request material confirmation for that same flange and the required construction. These are separate material specifications, not a combined grade. General flange images may illustrate several forms and cannot establish the material or exact weld-neck construction of the selected component.
Match the neck and raised-face joint
Obtain a drawing showing the neck geometry, bore, pipe-end preparation, RF facing and complete bolted interface. Compare the neck end with the adjoining pipe and the flange face with the mating flange, gasket and fasteners. Include the medium, pressure and temperature when requesting the selected configuration's qualification records. Before acceptance, confirm that the standard, pressure designation, grade and drawing all describe the same flange. This keeps pipe attachment and joint compatibility tied to the actual material and operating scope.
모든 제품 문의에 필요한 기술 정보
최종 제품 확정 전에 요구사항을 준비하세요.
제품 페이지는 출발점입니다. 재고 매칭 또는 맞춤 생산 확정 전에 도면, 샘플, 인터페이스, 소재, 수량, 검수 요구사항을 검토합니다.
프로젝트 상황에 맞춰 이 제품을 상담하세요.
도면, 샘플, 참조품, 목표 수량, 용도 정보를 공유하세요. 미확정 항목은 검토 상태로 둘 수 있습니다.
