B16.9 Q235 1/2-Inch 90° Short-Radius Butt-Weld Elbow
산업 소싱용
명확한 RFQ 준비
RELIA가 부품을 이해하고 다음 단계를 논의할 수 있도록 아래 정보를 포함하세요.
- 도면, 샘플 또는 참고 표준
- 재질 등급 및 선호 공정
- 치수, 공차 및 표면 처리
- 용도, 목표 수량 및 목적지
생산 일정, 포장 및 운송 조건은 사양과 거래 조건 합의 후 프로젝트별로 확정됩니다.
-
warranty1 Yearcustomized supportOEM, ODM
-
model numberelbow 2417TechnicCasting
-
ConnectivityFemale/MaleshapeReducing
-
head codeRoundSurface TreatmentPainting
-
Mounting hole diameter0.17 inPipe Class150
This elbow enquiry starts with the half-inch Q235 requirement in the title and the intended 90-degree short-radius butt-weld configuration. Select one offered model before assigning those requirements to an option. The millimetre size labels, material alternatives and Reducing field need a documented relationship to the actual bend and its pipe connections.
Identify both pipe ends before choosing a size
State the required nominal size and outside diameter for each end. Ask which millimetre-labelled option corresponds to the half-inch requirement and whether the selected model has equal or reducing ends. A Reducing label alone does not define the two sizes. Request an elbow drawing with wall thickness, centreline radius, end-to-centre dimensions and the accepted 90-degree angle. Check that this measured envelope fits the pipe route rather than estimating radius or end sizes from a product image.
Keep Q235 separate from photographic markings
Confirm the governing Q235 material specification and records for the selected carbon-steel item. A stainless-steel choice requires its own agreed grade. Visible markings on one photographed fitting do not identify every variant's grade or wall schedule. Request production and inspection evidence for the actual model before accepting its manufacturing route; the Casting field cannot replace that evidence. Define bevel, land and end wall for the mating pipe instead of relying on Female/Male as the connection description.
Establish the acceptance basis
Give the required B16.9 edition and dimensional inspection criteria alongside the joining and inspection requirements. Provide the fluid, operating pressure and temperature and relevant corrosion conditions for assessment of the complete welded joint. Class 150 does not by itself establish its pressure-temperature limit, and Painting or mounting-hole information does not qualify a protective finish or bend geometry. An actionable enquiry joins the half-inch option mapping and end-pair drawing to the exact Q235 specification, documented production route and agreed acceptance records.
모든 제품 문의에 필요한 기술 정보
최종 제품 확정 전에 요구사항을 준비하세요.
제품 페이지는 출발점입니다. 재고 매칭 또는 맞춤 생산 확정 전에 도면, 샘플, 인터페이스, 소재, 수량, 검수 요구사항을 검토합니다.
프로젝트 상황에 맞춰 이 제품을 상담하세요.
도면, 샘플, 참조품, 목표 수량, 용도 정보를 공유하세요. 미확정 항목은 검토 상태로 둘 수 있습니다.
