90 Degree Carbon Steel SCH80 B16.9 Pipe Elbow Enquiry
산업 소싱용
명확한 RFQ 준비
RELIA가 부품을 이해하고 다음 단계를 논의할 수 있도록 아래 정보를 포함하세요.
- 도면, 샘플 또는 참고 표준
- 재질 등급 및 선호 공정
- 치수, 공차 및 표면 처리
- 용도, 목표 수량 및 목적지
생산 일정, 포장 및 운송 조건은 사양과 거래 조건 합의 후 프로젝트별로 확정됩니다.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.25 in
-
Pipe Class1000SizeCustomized Size
-
Product nameElbow
A 90-degree pipe elbow enquiry should establish the required change in pipe direction together with the dimensions of the selected fitting. Confirm the exact nominal size and its relationship to the mating pipe before evaluating wall schedule or material requirements. Keep the drawing, material records and quotation linked to one elbow configuration.
Establish the Bend and Installation Geometry
Specify the required elbow angle and bend radius, then request centre-to-end dimensions and end geometry. Compare the drawing with the available installation space and the alignment of both pipe sections. Where the project calls for a three-quarter-inch fitting, confirm the nominal-size convention and corresponding pipe outside diameter rather than assuming an equivalence with a millimetre option. These dimensions establish whether the proposed elbow can be incorporated into the planned pipe route.
Define SCH80 Walls and the Steel Specification
State the schedule convention and obtain the actual wall thickness for the selected nominal size and exact steel grade. Include the required material designation and weld-end preparation at both connections. If seamless construction is part of the specification, request production evidence identifying the manufacturing route of the quoted item. Define any surface-treatment requirement separately; the visible surface does not establish steel grade, fabrication history or coating performance.
Verify the B16.9 and Operating Design Scope
Identify the applicable B16.9 edition and the conformity evidence required for the selected elbow. Describe the fluid, operating pressure and temperature, and provide the joint and fabrication requirements for the completed line. A wall-schedule label or isolated class number cannot replace a documented pressure-design basis. Use the final dimensional drawing, material and manufacturing records, joint detail and qualified service limits to complete the elbow review before deciding whether it meets the intended application.
모든 제품 문의에 필요한 기술 정보
최종 제품 확정 전에 요구사항을 준비하세요.
제품 페이지는 출발점입니다. 재고 매칭 또는 맞춤 생산 확정 전에 도면, 샘플, 인터페이스, 소재, 수량, 검수 요구사항을 검토합니다.
프로젝트 상황에 맞춰 이 제품을 상담하세요.
도면, 샘플, 참조품, 목표 수량, 용도 정보를 공유하세요. 미확정 항목은 검토 상태로 둘 수 있습니다.
