90° Stainless Steel Pipe Fitting Elbow Enquiry
산업 소싱용
명확한 RFQ 준비
RELIA가 부품을 이해하고 다음 단계를 논의할 수 있도록 아래 정보를 포함하세요.
- 도면, 샘플 또는 참고 표준
- 재질 등급 및 선호 공정
- 치수, 공차 및 표면 처리
- 용도, 목표 수량 및 목적지
생산 일정, 포장 및 운송 조건은 사양과 거래 조건 합의 후 프로젝트별로 확정됩니다.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.25 in
-
Pipe Class125SizeCustomized Size
-
Product nameElbow
This stainless elbow enquiry requests a ninety-degree change of pipe direction. The actual variants identify Elbow with broad material and millimetre size choices, but do not assign a bend radius, exact grade or wall. Use a selected drawing to define how the bend will fit your two adjoining pipes.
Check radius and clearance around the direction change
Confirm the requested angle with its tolerance, centreline radius and centre-to-end dimensions. Record the orientation and available installation space before selecting the bend. The photographs show several silver curved examples without establishing actual dimensions or material. Do not classify the selected elbow as short-radius or long-radius from those images; that choice needs the documented geometry.
Translate the size choice into both end measurements
Explain the nominal-size convention behind the millimetre menu labels, then verify each outside diameter and wall with the mating pipe data. Confirm what Equal means for the selected drawing. Hexagon, the mounting-hole value and Customized Size do not provide complete bend dimensions or a supplied capacity range. Establish the applicable dimensional requirement and wall designation; no schedule is stated here.
Define the stainless material and actual welded joint
Choose one exact stainless grade with complete specifications and traceability; the page does not identify 304 or 316. Alloy and Carbon Steel alternatives need their own material and joining assessment. Define Welding through the actual end detail, preparation, alignment and inspection requirements, without assuming a particular weld-end design. Verify Forged through production records and clarify Painting and joint-zone condition. Establish Pipe Class 125's standard, unit and material/temperature basis, then evaluate fluid, pressure, temperature, corrosion and mechanical loads across the bend and both completed joints.
모든 제품 문의에 필요한 기술 정보
최종 제품 확정 전에 요구사항을 준비하세요.
제품 페이지는 출발점입니다. 재고 매칭 또는 맞춤 생산 확정 전에 도면, 샘플, 인터페이스, 소재, 수량, 검수 요구사항을 검토합니다.
프로젝트 상황에 맞춰 이 제품을 상담하세요.
도면, 샘플, 참조품, 목표 수량, 용도 정보를 공유하세요. 미확정 항목은 검토 상태로 둘 수 있습니다.
