Carbon Steel Pipe Elbow | 45, 90 and 180 Degree Enquiry
산업 소싱용
명확한 RFQ 준비
RELIA가 부품을 이해하고 다음 단계를 논의할 수 있도록 아래 정보를 포함하세요.
- 도면, 샘플 또는 참고 표준
- 재질 등급 및 선호 공정
- 치수, 공차 및 표면 처리
- 용도, 목표 수량 및 목적지
생산 일정, 포장 및 운송 조건은 사양과 거래 조건 합의 후 프로젝트별로 확정됩니다.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.2 in
-
Pipe Class1000SizeCustomized Size
-
Product nameElbow
A steel pipe elbow enquiry begins with the required direction change and the route available for the pipeline. Select the angle and bend geometry before comparing material or manufacturing requirements. If the project needs a return arrangement, identify exactly how the proposed components form that arrangement so the complete assembly can be reviewed.
Choose the Angle and Identify Every Component
State whether the design requires a 45-, 90- or 180-degree direction change, then request a drawing of the selected proposal. Specify the bend radius and relevant end-to-centre dimensions. For a return requirement, establish whether the proposal consists of one component or joined components; identify every joint and include it in the fabrication review. The presence of several angle terms in an enquiry does not define a model for each angle.
Fit the End Geometry to the Planned Pipe Route
Provide the nominal size, mating outside diameter and wall thickness at both ends. Define weld preparation and compare the proposed geometry with available clearance, pipe alignment and support requirements. Name the exact steel grade and requested manufacturing route. Where seamless construction is required, obtain production documentation for the selected component rather than relying on surface appearance. Any coating or special mounting requirement should also be identified on the drawing and specification.
Review the Duty of the Complete Bend Arrangement
Identify the governing dimensional and pressure-design standards and state the fluid, operating pressure and temperature. Include relevant operating changes and the joint requirements that apply to the assembly. Request material, manufacturing and design records covering the proposed configuration. An isolated class number cannot establish the pressure capability of the fitting or its joints. Complete the enquiry with the angle, radius, component arrangement, end dimensions and qualified service scope so the intended direction change can be assessed as a complete pipeline detail.
모든 제품 문의에 필요한 기술 정보
최종 제품 확정 전에 요구사항을 준비하세요.
제품 페이지는 출발점입니다. 재고 매칭 또는 맞춤 생산 확정 전에 도면, 샘플, 인터페이스, 소재, 수량, 검수 요구사항을 검토합니다.
프로젝트 상황에 맞춰 이 제품을 상담하세요.
도면, 샘플, 참조품, 목표 수량, 용도 정보를 공유하세요. 미확정 항목은 검토 상태로 둘 수 있습니다.
